Torqeedo has launched a new 3 kWh battery, the Torqeedo Power 3, and a tiller-steered Cruise 12.0 outboard.
It has also added a set of TorqLink Gateways, so motor and battery data can be shown on other displays and rental fleets can monitor or even control boats remotely.
Torqeedo Power 3
The Power 3 is a compact 48 V battery, made to pair with the Cruise 3.0. Two of them in parallel will run a Cruise 6.0, or add range, and Torqeedo says you do not need external fuses for that.
The official manual lists the weight at 21.4 kg (the press release rounded that to 21 kg). Rated energy is 3,024 Wh (70 Ah), with 62 Ah usable.
The cells are NMC (nickel manganese cobalt) 21700, not LiFePO4 (lithium iron phosphate). That helps keep the weight down, I think, but it is a different chemistry from the house batteries a lot of us now carry on board.
It talks to the motor over TorqLink, so state of charge, system data and firmware updates show up on the display and in the TorqView app, in the same way as the Travel family. The manual also lists the Cruise 12 R among the compatible TorqLink products. The new Cruise 12.0 Tiller, though, is specified with Power 48 batteries, not this smaller pack.
Torqeedo calls the Power 3 waterproof and saltwater resistant. The manual is a bit more precise: IPX5, IPX7 and IPX8, with a note that this is up to a water level of 75 mm on the housing when the battery is upright.
Availability is the slightly woolly bit. Torqeedo says the Power 3 will be available starting in spring, rolled out market by market. They do not name the year. Given that this was announced in mid-November, my guess is spring 2027. There is no price yet.
If I were buying for a family boat, I would wait for the Power 3 and a real shipping date.
Cruise 12.0 Tiller

The Cruise 12.0 Tiller is a 12 kW tiller-steered outboard. Torqeedo says the thrust is comparable to a 25 hp combustion engine. It runs on two to ten Power 48 batteries, depending on how much runtime you want.
The tiller gets a new colour display. Motor and batteries exchange data in real time, and you can install software updates from the TorqView app.
A button on the display turns on Harbour Mode, which is meant to give you a softer throttle in a marina. The motor also tilts electrically, which is welcome if you are docking or in shallow water.
It shares the 48 V platform with the other Cruise models and the Travel family, so the idea is that it should feel familiar. I like that, if it is true.
The catch is the wait: it is not expected in Europe and the US until mid-2027. No price on this one either. The official picture is still a render, which is fair enough this far from production. So the tiller can wait until it is actually for sale.
TorqLink Gateways

The new TorqLink Gateways are aimed more at rental fleets and professional operators than at a private owner with one motor. Torqeedo says they can put system data on compatible third-party displays, monitor fleets remotely and, in the more capable versions, control a boat from a distance.
The press photo shows the Display Gateway 7017-00, supplied with a TorqLink T-cable. The product pages also list a Navigation Control Gateway 7018-00, which can show state of charge, rpm, motor torque and remaining run or charge time on NMEA (National Marine Electronics Association) 2000 displays, plus geofencing and fleet management.
The Remote Control Gateway 7019-00 adds remote and autonomous vessel control. I have not had my hands on any of them, and there is no price.
More in Torqeedo’s announcement, and in the Power 3 manual.






